+- Backup Education (https://backup.education)
+-- Forum: Equipment (https://backup.education/forumdisplay.php?fid=30)
+--- Forum: Network Attached Storage (https://backup.education/forumdisplay.php?fid=31)
+--- Thread: How do you update the firmware on a NAS device? (/showthread.php?tid=1282)
How do you update the firmware on a NAS device? - savas - 09-07-2021
Updating the firmware on a NAS device can feel a bit daunting if you haven’t done it before, but trust me, it’s usually a straightforward process once you get the hang of it. First things first, it’s essential to check if a firmware update is actually available for your NAS. Most manufacturers have a support page on their website where they list the latest versions.
Once you confirm there’s an update, you’ll need to log in to your NAS’s web interface. This is typically done by entering the NAS's IP address in your web browser. You’ll probably want to use an admin account to access all the features. After logging in, look for a settings or administration section; this is usually where the firmware update option is hidden.
Next, you should see an option like “Firmware Update” or “Update.” Click on that, and you might get an option to check for updates directly. If your NAS is connected to the internet, it can often do this automatically. Otherwise, you might need to download the firmware file from the manufacturer’s website and then upload it through the NAS interface. Just make sure you grab the right version for your specific model—getting this wrong can lead to a whole host of issues.
Once you’ve initiated the update, you might have to be patient. Depending on the NAS and the size of the firmware, it can take a little while. During this time, it’s crucial to avoid any interruptions. That means no power cuts or forcing a reboot, which could leave your device in a bad state. Once the process is done, your NAS will usually reboot automatically, and you should check everything’s working as expected afterward.
After the update, it’s a good idea to revisit the settings. Sometimes, manufacturers tweak features or default settings in new firmware versions. Familiarize yourself with what’s changed. This little step can save you headaches down the line.
Always remember, it’s a good practice to back up your data before jumping into any firmware updates. You can never be too careful. But honestly, once you get a couple of these under your belt, it becomes second nature.
I hope this helps! Also check out my other post regarding NAS backups.